COFFEE TABLE BASES · BRONZE
Faceted coffee table bases
Faceted forms in a bronze finish that carry glass tops, each moulded in a single piece.
B2B · Polyurethane factory in Tăureni, Romania
Bring us the sample. We put it into series production.
Since 2000, Linia Zetta has worked for businesses. If you have a 1:1 sample of an object, we turn it into structural or flexible polyurethane parts, produced in series in our factory in Mureș County. For clients in Romania and neighbouring countries.
In production now
What we’re moulding right now.
Two pieces coming out of our moulds in Tăureni right now, for Italian furniture makers: faceted bases for coffee tables and flared legs for a dining table. Both were on show at Salone del Mobile.Milano 2026.
DINING TABLE LEGS · BRONZE
Flared dining table legs
Two wide, angled legs in a bronze finish under a marble top.
Guessing game
Which piece did we make?
This photo is from a Compari stand at a furniture fair. One of the pieces was moulded in our factory in Tăureni. Hover over the objects and pick one.
The game photo is missing.
PICK A PIECE
Which one do you think we made?
You can also pick from the list. Unlimited tries.
Salone del Mobile · Milan 2026
Our pieces, in Milan.
At Salone del Mobile.Milano 2026, Italian manufacturers showed furniture with parts moulded at our factory in Tăureni: table legs and bases, mirror frames. The photos are from their stands.
Click a photo to see it full size.Send us your sample
01 · What we have made
Six families, one material.
From kitchen fronts to picture frames, everything starts as polyurethane inserts moulded in our Tăureni factory. They show what we can make for your product too.
TABLES & BASES · 8 MODELS
Sculptural table bases
Spirals, cones, crossed legs: each moulded in a single piece.
KITCHENS · 2 MODELS
Signa Rosa and Djakonda
Curved islands and glossy fronts, with no sharp corners.
BEDROOMS · 2 MODELS
The Tiffany bedroom
Bed, bedside tables, chest of drawers, mirror and wardrobe in one finish.
MIRRORS · 8 MODELS
Mirrors
PICTURE FRAMES · 4 MODELS
Picture frames
CHAIRS · 7 MODELS
Chairs
02 · Catalogue
Every model, on one page.
Thirty-one products in six categories, which we can also supply as they are. You can request a quote for any model: pick the product and the form fills itself in.
Images come from the current Linia Zetta catalogue. Available sizes and finishes are confirmed in the quote.
Request a quote
03 · In detail
Relief that is moulded, not carved.
Baroque mirrors show best what polyurethane can do: pierced scrolls, acanthus leaves and shells moulded in one piece and finished in gold or silver, at a fraction of the weight of carved wood.
MIRRORS
Baroque console with mirror
Finish:
- Material
- Structural polyurethane
- Pattern
- Dimensions
- Confirmed in the quote
04 · The material
Why polyurethane?
Linia Zetta chose polyurethane for ecological, economic and ergonomic reasons, as well as for the comfort and reliability of the products.
Every day we use polyurethane in one form or another: at home, at work, in cars, in sport and on holiday.
Polyurethane is a versatile, contemporary and safe material. Working with the best raw-material suppliers and new low-density materials, we create the widest range of furniture shapes and structures: pleasant to the touch, ergonomic, and lasting far longer than conventional furniture.
STRUCTURAL
Rigid like wood. Moulded like metal.
For parts that must keep their shape: frames, mirrors, fronts and housings. It is cast in a mould, so reliefs and curves come out in a single piece.
- Picture frames
- Mirrors
- Furniture fronts
FLEXIBLE
Soft to the touch, firm over time.
For surfaces you sit or lean on: chairs and upholstery. It returns to its original shape and stays comfortable for years.
- Chairs
- Seats
- Upholstery
Try it yourself
Three moulds, three kinds of polyurethane.
Choose the polyurethane for each mould. Once it’s poured, touch the piece: the rigid one won’t give, the soft one slowly recovers after you press it, and the flexible one stretches and springs back when you let go.
01
Ecological
Low-density materials: less raw material for the same shape.
02
Economical
One piece moulded in one go, with no joints and no hand carving.
03
Ergonomic
Rounded shapes, pleasant to the touch, designed around the body.
04
Durable
A service life far longer than conventional furniture.
Technical data
Less material, the same insulation.
Rigid polyurethane foam insulates as well with 3 cm as clay does with 20 cm. Beyond furniture, the same properties make it well suited to insulation.
Thickness needed for the same thermal insulation
Show the data as a table
Rigid polyurethane foam, by density
Indicative values from Linia Zetta’s technical sheets.
05 · B2B production
From one sample to series production.
Do you have an object you want to produce in series, in polyurethane? Send us the 1:1 sample and we take care of the rest, directly at the factory, with no intermediaries.
1STEP 01
You send us the 1:1 sample
The starting point is a full-size sample of the object: an existing part, a prototype or a model. Tell us the quantity, the finish and where it will be used.
- 1:1 sample
- Quantity
- Finish
2STEP 02
We assess it and quote
We decide whether the part should be made in structural or flexible polyurethane and send you the unit price and production lead time.
- Structural or flexible
- Unit price
- Lead time
3STEP 03
The mould and the first piece
From the sample we make the mould and cast the first piece. You check and approve it before we start the series.
- Mould
- First piece
- Approval
4STEP 04
Series production and delivery
We produce the series in our Tăureni factory and deliver across Romania and to neighbouring countries, or you can collect from the factory.
- Series production
- Romania
- Neighbouring countries
The factory
Where every piece is moulded.
The halls in Tăureni, the injection machines and the people who run them. Moulds are prepared, filled with polyurethane and opened here, from the first piece to the last in the series.
Photos from the Linia Zetta factory. Click a photo to see it full size.
06 · Quote
Have a sample? Request a quote.
Describe the object, the quantity and the finish you need. Attach photos of the sample to the email that opens. We reply with the price and production lead time. You can also request a quote for catalogue models.
- FactoryStr. Principală nr. 258, Tăureni, Mureș County, Romania
- Emailoffice@zettamobili.ro
- Opening hoursMonday – Saturday, 08:00 – 15:30 (EET)
07 · Questions
What businesses ask us.
What is a 1:1 sample?
A full-size example of the object you want to produce: an existing part, a prototype or a model. From it we make the mould and then produce the parts in series, in polyurethane.
I don’t have a sample, only an idea. Can you help?
Write to us and we will talk it through. The surest starting point is still a 1:1 sample, because the production mould is made directly from it.
Where is the factory?
In central Romania, in the village of Tăureni, Mureș County, 9 km from Luduș, at Str. Principală nr. 258. We are open Monday to Saturday, 08:00 to 15:30.
What is the difference between structural and flexible polyurethane?
Structural polyurethane is rigid and keeps its shape, so we use it for frames, mirrors and fronts. Flexible polyurethane is soft and elastic, suited to chairs and surfaces you sit on.
Why polyurethane rather than wood or chipboard?
Because it can be moulded into almost any shape: curves, reliefs and rounded corners, all in one piece. It is light, pleasant to the touch and lasts longer than conventional furniture.
Where do you deliver?
Throughout Romania and to neighbouring countries. Transport cost and lead time are included in the quote.
How do I request a quote?
Fill in the form above or email office@zettamobili.ro. Describe the object or the catalogue models, the quantity and the finish, and if you have a sample, send us photos of it.
08 · Where we are
Since 2000, in the heart of Transylvania.
Linia Zetta has been working since 2000. Over 25 years of experience and thousands of client ideas turned into real products, all at our factory in Tăureni, 9 km from Luduș on the road to Bistrița.
FactoryStr. Principală nr. 258
Tăureni, Mureș County, Romania
Open in Google Maps
Tăureni, Mureș County, Romania
2000the year Linia Zetta started
25+years of experience in polyurethane
Thousandsof client ideas turned into products
9 kmfrom Luduș, on the road to Bistrița